Tubalar Type LT Capacitors
Series 1.T.9.D
Low Voltage
Power Factor Correction Capacitors Three Phase Tubalar Type with Connectors
Technical Characteristics
| Standard | EN60831-1/2 |
|---|---|
| Capacitance tolerance | -5 % + 10 % |
| Frequency | 50 Hz (60 Hz upon request) |
| Temperature range | -25°C + 55°C |
| Dielectric losses | ≤ 0.5 W/kVAr |
| Maximum over voltage | 1.1 xUn |
| Maximum over current | 1.5 x In |
| Max. THD in voltage | 2% |
| Max. THD in current | 25% |
| Discharge resistance | Incorporated |
| Connection | Delta |
| Casing | Aluminium can |
| Disconnection system | Overpressure |
| Dielectric | Metallized polypropylene film |
| Voltage test Between terminals | 2.15 x Un 2 sec |
| Voltage test Terminal to case | 3 KV for 10 sec. AC |
| Terminal | Connector |
Click the Tabs below:
| Power kVAr | Voltage Vac | Dimensions D x H (mm) | |
|---|---|---|---|
| View Details | 1.0 | 440 | 70 x 290 mm |
| View Details | 3.0 | 440 | 70 x 290 mm |
| View Details | 5.0 | 440 | 70 x 290 mm |
| View Details | 7.5 | 440 | 70 x 290 mm |
| View Details | 10.0 | 440 | 85 x 290 mm |
| View Details | 12.5 | 440 | 90 x 290 mm |
| View Details | 15.0 | 440 | 90 x 290 mm |
| View Details | 20.0 | 440 | 126 x 290 mm |
| View Details | 25.0 | 440 | 126 x 290 mm |
| Power kVAr | Fuse (A) | Cable cross section (mm²) |
|---|---|---|
| 1.0 | 3 | 1.0 mm² |
| 3.0 | 10 | 1.5 mm² |
| 5.0 | 16 | 2.5 mm² |
| 7.5 | 25 | 2.5 mm² |
| 10.0 | 35 | 4.0 mm² |
| 12.5 | 40 | 4.0 mm² |
| 15.0 | 50 | 6.0 mm² |
| 20.0 | 65 | 10.0 mm² |
| 25.0 | 75 | 16.0 mm² |
| 50.0 | 150 | 35.0 mm² |